Features: * 8 Inch: Applicable to band saw wheel diameter 205mm, tips band saw blade length is 1425mm. * In order to ensure that the anti-slip rubber ring can be tightly connected to the outer edge of the wheel and avoid slipping and insufficient cutting force due to the loose rubber ring, the circumference of all anti-slip rubber rings must be smaller than the circumference of the band saw wheel.* The rubber ring has good resistance on wear and durability, ensuring that it is not easy to break and loose after installation. Installation method: 1. Remove the original damaged rubber ring. If there is rubber ring residue on the outer edge of the wheel, please clean the residue first.2. Soak the new non-slip rubber ring in warm water for 3-5 minutes and install it after the rubber ring has softened.3. When installing, start from the side of the wheel, press the end of the rubber ring firmly into the groove on the outside edge of the wheel, then use a flat-head screwdriver to slowly pry the rubber ring into the groove on the outside edge of the wheel. Don't use too much force. It is so violent that the rubber ring is damaged.4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel for a more secure installation. Specification: Product Name: Rubber Band Saw Material: Rubber Color: Yellow Size: 8" x 1/2" x 0.12" (205*12.7*3mm)(Approx.) Suitable for: Woodworking Band Saw Quantity: 1Pc Package includes: 1 band saw eraser Note: 1. Transition: 1cm = 10mm = 0.39 inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for data.4.Please after receiving the goods, put them in hot water and heat to distribute evenly.