EP4CE6E22 Development Board This is an EP4CE6E22 FPGA development board with a JTAG download port, conveniently connected to a downloader. Onboard peripherals include: a CH340 serial port chip, a W25Q memory chip, 5 LEDs, and 5 pull-up buttons. One 27Mhz pushbutton. Two active crystal oscillators, one 50Mhz. Selectable pin voltages, allowing you to drive modules with different voltages. Due to the FPGA's tendency to lose program data upon power failure, you must flash the program to the onboard EPCS memory chip. After flashing, you must power on again. Size:10 x 5 x 2cm/3.94 x 1.97 x 0.79in Color: Black Material: PCB Package Contents: 1 * Development Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.