The group directly takes power from the battery, and the lamp power does not pass through the original car harness, and is directly powered by the reinforcing wire group. The original only plays a controlling role, so that it will not have any impact on the original car, and it can also solve the problem that the lamp cannot be started normally due to the aging of the old car. The group (also called the power reducer) directly takes power from the battery. There are relays and fuses on the group, which can better the original vehicle , play a role of strengthening and stability, and reduce the impact on the original car switch. Because the starting current is , the original car is designed according to the halogen lamp. In some models, the headlight of the original car is too small. If the is assembled without the wire, there may be a phenomenon that the two lights cannot be started at the same time. Therefore, the enhanced wire group can make the effect of the lamp more stable, the failure rate is lower, and the service life is , which can effectively the lamp and your car. Name: Relay harness Application: Automotive H11/880 headlights to strengthen the wiring harness colour:black Material:plastic Package Contents: 1 * harness Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.