説明
Introduction:
HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO FlightController, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it's really excited for this small whoop could record a video with gyroflow steady and keep safe flying.
Features:
X12 5-IN-1 AIO flight controller.
VTX Power up to 400mw.
ELRS V2.0 Support.
NEW RS0802 KV20000 motors.
1080P HD Video record.
Blackbox Ready support GYROFLOW.
Smooth and powerful.
Compatible for 1S Lipo/LIHV.
Recommend 1S 450mah/550mah/650mah batteries (Not include).
Specifications:
Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone;
Wheelbase: 75mm;
Size: 99mm*99mm*45.5mm;
Weight: 33g;
Receiver option: SPI 2.4GHz ELRS V2.0 / SPI Frsky D8/D16.
Motor:
Mode: RS0802 KV20000;
Configu-ration: 9N12P;
Stator Diamter: 8mm;
Stator Length: 2mm;
Shaft Diameter: Φ1.5mm;
Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm;
Weight(g): 2.0g;
No.of Cells(Lipo): 1S only.
Propeller: Weight: 0.24g;
Material: PC;
Pitch: 1 inch;
Props Dia: 40mm;
Center Thickness: 5mm;
Center Hole Dia: 1.5mm.
Flight Controller:
X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280;
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR;
MCU: STM32F411CEU6 (100MHZ, 512K FLASH);
Sensor: ICM20689(SPI connection);
Mount hole size: 25.5mm*25.5mm;
Power supply: 1S battery input (DC 2.9V-4.35V);
Built-in 12A(each) Blheli_S 4in1 ESC;
Built-in Betaflight OSD(SPI Control);
Built-in 5.8G OpenVTX 0mw~400mw;
Built-in ExpressLRS 2.4G,Frsky D8/D16;
Built-in voltage detection;
Built-in current sensor.
Onboard 4in1 ESC:
Power supply: 1S LiPo/LiPo HV;
Current: 12A continuous peak 15A (3 seconds);
Support BLHeliSuite programmable;
Factory firmware: Z_H_30_REV16_7.HEX;
Default protocol: DSHOT300;
Support Bluejay firmware;
When use Blujay firmware with 48khz, should set startup power to 1100/1200.
Onboard SPI ExpressLRS 2.4GHz Receiver:
Packet Rate option: 50Hz/150Hz/250Hz/500Hz;
ExpressLRS Firmware version: V2.0;
RF Frequency: 2.4GHz;
Antenna : Enameled copper wire length 30mm;
Telemetry output Power: <12dBm;
Receiver protocol: SPI ExpressLRS;
Compatible with ExpressLRS V2.0 TX Module;
Couldn't flash separately ExpressLRS firmware.
Onboard Frsky SPI D8/D16 receiver Version:
Packet Rate option: 50Hz/150Hz/250Hz/500Hz;
ExpressLRS Firmware version: V2.0;
RF Frequency: 2.4GHz;
Antenna : Enameled copper wire length 30mm;
Telemetry output Power: <12dBm;
Receiver protocol: SPI ExpressLRS;
Compatible with ExpressLRS V2.0 TX Module;
Couldn't flash separately ExpressLRS firmware.
-
Fruugo ID:
203021042-431769285
-
EAN:
9078193440577
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
安全上の警告:
Not suitable for children under 36 months,
The parcel bag is not a toy.
Keep away from children to avoid suffocation hazards.
