Product description Careful selection of materials: Molds are made of PC material, compared to acrylic material, it has better heat resistance and stability, strong and sturdy, you can use them for a long time and are not easy to break. Easy to use: Attach the wick to the center of the mold. Cover the lower wick hole with plasticine to make sure it doesn't leak. The soy wax top wax is heated and melted at a ratio of 1:1 and then poured into a mold to await molding. Mold can be easily removed from the mold and the operation is very simple. Easy to take out of the mold: The surface of the mold is smooth. After the finished product is cured, it can be easily taken out by flipping it upside down (Tip: After the finished product is cured, put it in the refrigerator for 15 minutes, the demoulding effect will be better). Easy to clean: Put the product in warm water, take it out after the wax left on the mold inner wall melts, and then clean it with detergent, which is very simple and convenient. Wide range of use: Molds include 2*light conical molds, 2000 mm/78.7 inch cotton core, 1* mold. Mold can be used to make candles such as paraffin, wax, palm wax, beeswax, etc. It can meet the needs of various candle crafts in your daily life and exercise your practical ability.