How To Replace a Band Saw Tire? 1, Unplug the Band saw, loosen the saw blade tension and remove the blade. Then remove the band saw wheel. 2, Once removed, completely remove or cur the old tire and any residue left behind. 3, Slide part of the tire onto the wheel rim, then slip a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tire's elasticity. 4, Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface.Roll and repeat all the way around the rim. Let the glue dry for 24 hours before using the saw again. 8 inch Diameter: for 8inch (205mm) bandsaw wheel Suitable for Draper, Einhell, Scheppach HBS20 band saws using 1400mm & 1425mm bandsaw blades. Size:about 12.7mm wide x 3mm thick / 9inch Diameter: for 9inch (230mm) bandsaw wheel Suitable for Delta 28-150 BS100, Craftsman, Grizzly band saws using 1570 & 1575mm bandsaw blades. Size: about 12.5mm wide x 3mm thick / 12inch Diameter: for 12inch (305mm) bandsaw wheel Suitable for Makita LB1200F, Charnwood W721, Craftsman, Jet, Grizzly band saws using 2240mm bandsaw blades. Size: about 20mm wide x 3mm thick / 14inch Diameter: for 14inch (350mm) bandsaw wheel Suitable for Jet, Grizzly, Powermatic band saws using 2560mm bandsaw blades. Size: about 24.5mm wide x 3mm thick Colour:black Material:rubber Package Contents: 2 x Band Saw Rubber Tire Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.