Feature: 1. Red copper coil: The solenoid valve adopts sufficient red copper coil, ensures longer service life, which is not easy to heat after long time use, more stable than ordinary solenoid valve. 2. Aviation die-cast aluminum body: Die-cast aluminum valve body, with high strength and toughness, not easy to deform, break and damage. 3. Fine polished: The surface and inner wall are finely polished to ensure smooth interface without burrs and good airtightness without leaking. 4. Good sealing: The solenoid valve uses premium sealing ring to ensure good sealing performance, stable and reliable performance. 5. Low abrasion: There is softened oil between the moving parts inside the solenoid valve, which effectively reduces wear between parts. Specification: Item Type: Pneumatic Solenoid Valve Material: Aluminum Alloy, Copper Switching Mode: Direct Acting 2 Position Single Coil Operating Fluids: Air Operating Pressure Range: -101.2 kPa to 0.1 MPa Ambient temperature and operating fluid temperature: -10 to +50 (non-frozen) Response time: less than 20 ms (0.5 MPa) Maximum action frequency: 10 Hz Oil supply: not required (if necessary, turbine oil type ISOVG32 is used for oil supply) Manual operation: Non-locking push type Installation method: Free Shock and vibration resistance: 150/50 m/s Protection class: Dustproof Output method: Direct output, DIN plug type Rated coil voltage V: 220V AC Allowable voltage variation: -15% to +10% of rated voltage Power consumption: 4W /> Package list: 1 x pneumatic solenoid valve