Item Type: Shock Damper <br>Model: FRH6335M10 <br>Rubber Hardness: 40 <br>Average Load: 20kg/mm <br>Maximum Load: 46kg <br>Maximum Compression: Approx. 2.3mm / 0.1in <br>Uses: Car generator and piston generator, electric motor, generator, compressor, engine, motor water pump, refrigerator, metal and other structures, for shock absorption effect.<br>1、This bell&#8209;shaped shock damper can achieve a high degree of shock absorption effect in axial pressure and lateral pressure <br>2、Used in generators, engines and systems, the shock absorption effect is very good, the application range is about 25Hz (1.500rpm) <br>3、The internal rubber and iron parts are full glued to provide the best shock absorption effect, in addition, safety lock parts are safety <br>4、H stands for Hard, this type of shock absorbing pad has a small amount of rubber compression and a large load, suitable for motors with a frequency of 1500?3500Hz. <br>5、The bell?shaped shock damper can bear the pressure and shear force at the same time, and the rubber is firmly bonded through vulcanization and the bottom galvanized steel plate2 x Shock Damper