Specification: Name: roof rack Material: aluminum strip + ABS plastic feet Quantity: 1 pair Length of individual crossbar bracket: long bar (front): 93.51 cm; short bar (rear): 901 cm Color: Black Adjustable length: long rod (front): 104-105 cm; short rod (rear): 101-102 cm Weight: 45-50 kg (Remarks: You can also refer to the opponent's link) The package includes: 1 pair x roof rack notes: 1. Please allow 1-3 cm (0.4-1.18 inch) difference due to manual measurement and slight color variation with different display settings. 2. Due to light and screen differences, the color of the product may be slightly different from the picture. Please understand that. 3. Please check the year, make and model of your vehicle before purchasing. Installation Notes : 1. Parts list: A: 2 * crossbar brackets B: 4 * Mounting Brackets C: 8 * Shoulder Bolts D: 8 * Allen bolts (fixed directly on the crossbar bracket) E: 2*hexagon wrench (one big and one small) 2. Clean the roof before installing the roof rack. 3. Remove the original roof screws and store them. 4. Before installation, check the installation direction of the rails of the roof rack. 5. Assemble the front and rear roof racks as shown. Remove the screws on the crossbar, insert the crossbar into the clamp foot bracket, and secure with the round head bolts. (Please confirm the front and rear direction before installation) 6. Place the roof rack between the roof rails. 7. Make sure the roof rack is properly installed on the roof rail and the attachment holes are above the factory rivet nuts. 8. Secure the front roof frame to the roof rails with the shoulder bolts. 9. Tighten the shoulder bolts to 8 ft-lbs. Tighten the grub bolts under the mounting brackets to 6 ft-lbs. 10. After installing the roof racks, shake each rack to make sure it is secure. 11. Removal steps of the luggage rack (as shown in the figure): Remove the screws of the clip feet and the roof part, remove the luggage rack, and replace the original screws.