Feature: 1. Load: The two phase incremental encoder has radial load less than or equal to 30N and axial load less than or equal to 20N, and the protection level is IP50. 2. All Metal Gear: Our incremental encoder is wear resistant, strong in load bearing capacity, robust and effective in protecting the main body of the gear box motor. 3. High Temperature Resistant: Two phase rotary incremental encoder is high temperature resistant and stable, which can be used safely. 4. Compact Structure: Two phase rotary incremental encoder is small in size, light in mass, compact in structure, easy to install, etc. 5. Wide Application: Our encoder is suitable for intelligent control of all kinds of drainage measurement, automatic fixed length leather, automatic paper cutter, steel cutting length control, measuring height human scale and robot. Specification: Item Type: Encoder Material: Stainless Steel, ABS Output Mode: Push Pull Output F (PNP) Encoder Outer Diameter: Approx. 50mm / 2in Radial Load: ≤30N Axial Load: ≤20N Starting Torsion: ≤2x10 Negative Cubic N.M Maximum Speed: 6000r/Min Rotational Inertia: 20g/Cm² Allowable Angular Acceleration: 2x10 biquadrate Rad/S Shock Resistance: 1000m/S².6ms Anti Vibration: 1000m/S².10-200Hz Operating Temperature: -10℃-+70℃ Storage Temperature: -20℃-+80℃ Relative Temperature: