SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the of motherboard interface, and focus on processing the fan wire.Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the of motherboard interface, and focus on processing the fan wire.Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis.8 way without speed measurement and PWM function, you can manually adjust the gear position, the fan at full speed (LOW) or low speed (LOW), or turn off the fan.EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to power.Material:PC+metalcolour:blackPackage Contents:2 * Chassis Fan HubOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.