Features 1、[Array Pressure Sensor] With 36 sensing points, 6 in the horizontal and 6 in the vertical directions, one sensing point every 2.5X2.5mm. The spacing between the sensing points is 0.7mm, and the resistor value of each sensing point decreases with the increase of pressure acting on it. The interface adopts X+Y mode, with a total of 12PIN and PITCH 0.5mm. 2、[Stable Performance] The default activation resistor threshold of the pressure sensor exceeds 20MΩ, ensuring stable performance. 3、[Long Lasting] The sensor can operate within a temperature range of -20℃ to +65℃, guaranteeing durability in various environments. 4、[Anti EMI and EDS] Designed to be immune to electromagnetic interference (EMI) and electrostatic discharge (EDS), this sensor provides accurate readings without interruptions. With a hysteresis less than +10%, it exhibits minimal deviation under a 24 hour static load of 1kg. 5、[Versatile Applications] Suitable for pressure distribution measurement, multi point monitoring, handwriting area analysis, gestures analysis, localized force analysis. Specification Item Type: Force Sensitive Resistor Material: Polyester film, high conductivity material, nanoscale resistor material Thickness: Approx. 0.3mm / 0.01in Sensing Unit: Approx. 50x17mm / 1.97x0.67in, 36 pieces Trigger Force: 20g Pressure Range: 20g~5kg, single sensing point Resistor When Not Triggered: >20MΩ Electromagnetic Interference EMI: Does not generate Electrostatic Discharge EDS: Insensitive Response Time: