2 PCS Auto parts: 1 x Idle Air Control Valve & 1 x Glass lifting switch in . Direct from manufacturer. Identical in appearance and operation to your ( equipment manufacturer) switch. This switch is the complete unit you need including buttons, circuit board, plug ins, etc. INSTALLATION: If you have never removed or installed this switch please don't pay to have it done. It is an easy 5 minute job. Carefully pry up the plastic switch cover or bezel, the switch is attached to it with screws and your door wiring is plugged into the switch with a tabbed gang wire clip. Pull out the clip without tugging on the wiring. You may need to depress a tab with a small screwdriver while doing this. Plug in switch and test. Swap the cover onto the switch and drop back in the door. Done! PLASTIC MOLDING COVERING SWITCH (OR "BEZEL"): This is a separate piece that easily detaches from the actual switch your are replacing. You do not need to buy the bezel or a used switch with the bezel attached (unless of course your bezel is broken or missing!) Part #: 9540930005 35150-22600 Condition: Applicable models:For Accent 1.6L Tiburon 2.0L Model: for Fitment Type: Direct Replacement Interchange Part Number: 35750-S5A-A02ZA colour: black Material: Core board + plastic glue + ABS Package Contents: 1 x Idle Air Control Valve 1 x Glass lifting switch Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.