説明
Motor Vehicle Sensors
Note: Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.
SPECIFICATION :
Replace For Part Number:
52933-2M650; 52933-A5100; 52933-2J100; 52933-2M600; 52933-3N100
Battery Life: ABOUT 3YEAR
Operating Frequency: 433MHz
PACKAGE CONTENT :
NORMAL PACKET
Application
For Genesis G80(from 2017-09 to 2020-00)
For Hyundai Accent [HC](from 2017-04 to 2023-03)
For Hyundai Accent [RB](from 2011-03 to 2017-03)
For Hyundai Equus [VI](from 2009-07 to 2016-06)
For Hyundai Genesis [DH](from 2014-02 to 2020-06)
For Hyundai Genesis Coupe [BK](from 2008-09 to 2018-01)
For Hyundai I30 [GD](from 2012-01 to 2016-12)
For Hyundai Ix20 [JC](from 2010-09 to 2018-06)
For Hyundai Ix55 [EN](from 2006-10 to 2016-03)
For Hyundai Porter [HR](from 2005-07 to 2027-06)
For Hyundai Santa Fe Iii [DM](from 2012-06 to 2018-03)
For Hyundai Solaris [HC](from 2017-04 to 2023-03)
For Kia Cadenza [VG](from 2011-01 to 2016-07)
For Kia Carens IV [RP](from 2013-01 to 2019-01)
For Kia Ceed [JD](from 2012-04 to 2018-04)
For Kia Ceed [JD](from 2012-05 to 2018-04)
For Kia Mohave [HM](from 2008-12 to 2019-02)
For Kia Picanto [TA](from 2011-02 to 2016-12)
For Kia Sorento II [XM](from 2012-10 to 2014-10)
For Kia Sorento III [UM](from 2014-11 to 2021-12)
For Kia Venga [YN](from 2009-11 to 2018-06)
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
FAQ
Q: Frequently of TPMS sensor
A: 433mhz
Q: Did they tpms sensor need to make program
A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Q: Relearn Procedure
A: OBD Relearn
-
Fruugo ID:
294760986-659376856
-
EAN:
8050287761776
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction.
GENERAL WARNINGS
INTENDED USE: Use this product only for its intended use as described in the user manual.
SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities.
INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.
