No sensor programming Required : The Tire Pressure Sensor is new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained .Part Number:52933-D9100MPREHENSIVE VEHICLE COVERAGE Installation Process:Loosen the tire: Remove the valve cap and core and deflate the tire.Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.Mount the tire: Place the tire on the rim, making sure that the valve the separation head at an angle of 180 degrees. Mount the tire over the rim.Fit Car:For G90 2017-2018For 2016-2019For IONIQ 2017-2019For 2018For 2018For CADENZA 2017-2018For 2017-2019For 2015-2019For 2017-2019Colour: blackMaterial: ABSPackage Contents:1 * Tire Pressure SensorOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.