Features: Anti fog glass. CMOS imaging sensor High grade of waterproofing: IP66. High-definition and 150 degree wide viewing angle. Applicable to variety of vehicles: car, truck, RV, etc. Snap-in design, it is easy to install. Its simple and modest design and small size won\\\'t draw any attention. It helps to avoid incidents and accidents abrasion well. Specification: Image Sensor: CMOS 1/4 MT9V125 or PC1030, color TV system: NTSC (If you need Pal system, please contact the seller) Horizontal Resolution: 420 TV lines Minimum Illumination: 0.5 Lux Lens: 13.5mm View Angle: 150 degree Sync. System: internal S/N Ratio: >48dB Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds Video Output: 1.0Vpp, 75Ohm White Balance: Auto Power: DC 12V Current Consumption: 90mA Operating Temperature: -20 to + 70C, 95% RH maximum Storage Temperature: -40 to + 100C, 95% RH maximum Water-proof: IP66 Image Reverse: Left-right mirror Video Cable Length: 6m Power Supply Cable Length: 1.5m Camera size: 2.2 * 2.8cm Camera Weight: 34g Package size: 16.4 * 10 * 5cm Package weight: 214g Installation: Connect the yellow video output connector to terminal display device. Connect the black power input connector to power output device. Package Included: 1 * Car Rear View Camera 1 * Video Cable 6m 1 * Power Cable 1* drill Instruction : * No-DVD-Player or DVD-off Condition: when reversing, the monitor is automatically switched on to display real-time backup images. After reversing, it is automatically switched off. * DVD-On Condition: When reversing, the monitor is automatically switched to display real-time backup images. After reversing, it is automatically switched back to display DVD video.