Features: Cleaning Code: Press button A and button B simultaneously with two fingers the LED light flashes 3 times quickly in about 2 seconds release one finger (the other hand cannot be released) then release the finger and press quickly Release the button 3 times until the LED light flashes quickly two fingers can be released then press any key on the remote control when the LED light is off the code is cleared successfully (all four keys are empty) if you press any key A remote control the light is still on after pressing the button indicating that source code has not been successfully cleared. It must be cleared again and the clone can be successful only if the code is cleared successfully. You can re-clean and clone the code. Duplicate: The original remote is held in the left hand and our cloned remote is held in the right. Move the two remotes as close as possible press the first button of the two remotes at the same time after about 2 seconds the LED light will flash twice quickly after one second the indicator light will continue to flash release your finger press after successful learning Press the button the light is always on indicating that the first key code on the original remote control has been copied to another remote control the same method can turn the second into a rotation button the third button... If the copy is successful the remote control The controller functions the same as the original compatible remote control. Recovery: When the remote control copy password is accidentally cleared you can press the two buttons at the bottom of the remote control at the same time to copy the LED light flashes quickly press any key and release it to keep it on which means the remote control code included. recover. Remember to delete the existing code from the remote before using our duplicate remote. Long Remote Control Distance: Strong RF signal offering a reliable and effective remote control distance up to 150 m (open area). The wireless RF signal can pass through walls floors and doors. Easy to Use: The 4 channel remote control system lets you take control of your gadgets car home and garage. Specification: Frequency: 433MHZ or 315MHZ Color: Black Button: 4 buttons Copy Compatible Range: (suitable for export wide compatibility) 2260 (all manufacturers) 2262 (all manufacturers) PT2264 5326 (all manufacturers) SC5262 HT600 HT680 HT6207 HT6010 HT6012 HT6014 SMC918 series 527 (all manufacturers) 1527 (all manufacturers) 2240 (all manufacturers) HCS101 HCS200HCS201 (part of the code) HCS300HCS301 (part of the code) part of the microcontroller. includes: 1Wireless Copy Remote Control Switch Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store