Material: MS modified silane polymerCapacity: 12gAppearance: Paste (white/transparent)Curing mechanism: moisture curing (relying on moisture in the ai r to promote curing)Face dry time: 20 minutes (spray a little water can accelerate the curing time)Follow-up operation: press tightly (fixed with auxiliary stickers or double-sided tape for more than 2 hours)Specific gravity (density): 1.52g/mlHardness: 55%Maximum deformation: 20%Elastic recovery rate: 80%Temperature (after curing): -45+90Elastic modulus 100%: 3.0N/mmTear strength: 3.8N/mmTensile modulus at break: 200%Home Improvement: ceramic tile/glass/latex paint face/marble/granite/concrete face/gypsum board/rock wool/wood, etc.Metal: aluminum/steel/copper/iron/zinc, etc.Plastic: PC/PVC/GPPS/PMMA/PS/EVA/PET, etc.Environment: Humid environment (bathroom/kitchen), outdoor (anti-ultraviolet/low temperature), high temperature (automobile/industrial factory) Specifications:Widely used and easy to operateIt has a waterproof effect, moisture resistance, cushioning and the like.Non toxic, solvent-free, non-polluting, non-corrosive, anti agingApplication: frosted glass, marble, lacquered wood, soft metal plates, tiles, mosaics. It is best to use an invisible wall mount.More sticky, no safer nails, high strength, quick-drying glue, no noise, environmentally friend Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store