Specifications:<br> Electrical Rating: 6A 125VAC - 3A 250VAC<br> Function: ON-OFF<br> Type: Used in ceiling fan light kit and pull chain light fixture<br> Dimensions (approximate): 0.82 x 0.82 x 0.56 inch<br> Color: transparent + black<br> RU approved: E89885<br> Material: ABS<br> : Brass<br> Wiring Steps For Ceiling Fans:<br> 1. Make sure the existing light switch has 2 wires. If there are 3 wires, A 3-wire switch is required.<br> 2. Cut the two wires from the existing light switch using wire stripper.<br> 3. Strip black wires around 1/2 inch.<br> 4. Connect one black wire from the light switch to one black wire from the ceiling fan.<br> 5. Connect the other black wire from the light switch to the other black wire from the ceiling fan.<br> 6. Secure connection between the wires using wire connectors by twisting them in a clockwise.<br> 7. Connection of wires must be secured, otherwise, it may result in fire hazard, electrical shock or serious injury.<br> Package Contents:<br> 3 x Ceiling Fan Light Switch<br> Only the above package content, other products are not included.<br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store