1、The power meter can detect a RF signal of power from -72dBm to -2dBm and convert the RF signal into a DC voltage output. 2、This product is used for RF signal power detection with detection frequency ranging 0.1-2.5 GHz. 3、The larger the RF signal amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input signal amplitude, thus enlarging the dynamic range of the detected signal that is up to 70dB. 4、Widely used in RF signal detection, signal power measurement, environmental field sength detection. 5、It can also be used as part of automatic gain conol and automatic level conol.Condition: Brand NewItem Type: Logarithmic DetectorMaterial: MetalColor: As shown in the pictureWorking Frequency: 0.1-2.5 GHzMeasuring Power: -72dBm to -2dBmOutput Voltage: 0.5 1.65VDetection Slope: 18mV / dBm typical valueInput Impedance: 50 ohmsPower Supply Voltage: 7-15V 1 x Logarithmic Detector Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store