1, if you paste on the surface of glass or tile, because the material is relatively smooth, it is better to use a clean cloth to dry the surface of the paste before sticking, so that it is easierto stick and the flattening effect is good;2, Some larger pattern stickers may cause some bubbles;then you can use a scratch card to remove the bubbles or use the tip of a needle to break the small bubbles, which will not affect the overall effect of the paste;3, If the wall paste is damp, aging or just repainted, the paste may cause the wall stickers to automatically fall off or peel off the wall.You can use a hair dryer to dry the wall or wait a while for the paint to evaporate and then paste, but the effect may be different, so pay attention to the customer's location;4, if you are not careful to paste the wall in the wrong place, you can use a small blade to gently lift the corner of the wall sticker to tear it off, the re-adhesive can be, this product can be reused under circumstancesnormal, as long as it is not torn;5. The size of DIY series products is reduced, you can play with unlimited creativity, freely combine the pattern and location, you can first use scissors to cut the pattern separately, cut time to be carefulnot to damage the pattern! Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store