2025 Fox X2 Float Shock Rebuilding Toolkit Featuring Vise Clamp Sealhead and 4-Pin Sockets

¥6,790
+ 配送料¥1,099

2025 Fox X2 Float Shock Rebuilding Toolkit Featuring Vise Clamp Sealhead and 4-Pin Sockets

  • ブランド: Unbranded

2025 Fox X2 Float Shock Rebuilding Toolkit Featuring Vise Clamp Sealhead and 4-Pin Sockets

  • ブランド: Unbranded
希望小売価格: ¥13,590
価格: ¥6,790
得する金額: ¥6,800 (50%)
販売元:
¥6,790
+ 配送料¥1,099

在庫あり

以下の支払い方法を利用することができます

説明

This auction is a combination set. It has 6 tools for the fox dhx2 and X2 shocks. All tools are made in the USA. They are CNC machined out of 6061 aluminum. This is all the clamps and all the pinned sockets you need to rebuild the fox X2 shock. First we have shock clamp for the FOX float dh x2 and X2. The clamp fits the 3/8" shaft and the inner air sleeve. The 3/8 will not fit older versions of the x2 shocks. Its made for a precision fit. We left plenty of material so there is a lot of clearance when using the 3/8 shaft clamp, and we made it .440 thick to fit into the tight spaces. It is thin enough to fit the version shock. It is the same fit as fox tool number 803-01-690 Next we have a wrench for the negative air seal head. Its 9.5" long and has chamfered corners so its easy on your hands. It has a 3/8" square drive so you can torque it to spec, just line the torque wrench up to the line (perpendicular to the wrench) and your good to go. This is the same fit as fox part number 398-00-419. This tool fits - x2 and dhx2 float shocks. Then we have a bearing housing driver, this is the tool on step 12 of the fox float x2 rebuild instructions. This is the same fit as fox tool number 398-00-887. This is used on the fox x2 shocks. It has 4 hardened steel pins and is CNC machined for a great fit. It has a 30mm hex that is plenty tall for a wrench or a crescent. Then we have the REZI vice clamp. It includes the 1.25 inner air sleeve clamp , equivalent to fox part number 803-01-690 and the Rezi body clamp, equivalent of fox 803-01-545 . The rezi body clamp is only used in and the inner air sleeve clamp will fit all fox shocks. The rezi body side of the clamp we left plenty of clearance so you end up with 170 degrees of working room. Clunky clamps can be as little as 90 deprees. Last we have a cartidge cap tools. They have 4 hardened pins that fit both redand blue caps for the dhx2 and X2 shock only. One has has a 3/8" square drive, the other will fit a 5/8 or 16mm socket. It is the same fit as fox tool number 398-00-882 and 398-00-881 Shock is NOT included in auction, just the tool. We have several listing of these tools individually or in small sets. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store
  • Fruugo ID: 372592486-806893007
  • EAN: 6015827784761

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 36 months
材料: Plastic 5%

配送と返品

24時間以内に発送

  • STANDARD: ¥1,099 - 間の配達 月 27 10月 2025–火 04 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • YJL Official Store 02
  • Quanzhou Yijiele Technology Co., Ltd
  • Room 3110, Building 2, Vanke Jinyu Binjiang Phase 2
  • 1118, Quanan North Road
  • Jinjiang City
  • CN
  • 362212
  • mikoautoparts@outlook.com
  • 8615980665206

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen
  • DE
  • 60329
  • E-CrossStu@web.de
  • 69332967674