説明
For KTM 790 Duke / Adventure Tips:
The Throttle Lock is not recommended for the 790 series when using the OEM throttle tube. Customers will need to change to an aftermarket throttle tube, such as G2 aluminum tubes. The OEM throttle tube is considered to be incompatible. Additionally, there is a lip at the seam of the throttle housing on the side facing the rider. It is recommended to loosen the mounting bolts for the throttle housing and square up the seam before mounting the Throttle Lock. G2 aluminum tubes Model: 4 stroke ALL MODELS ('17-'21).
Top Kit:
You'll want a Top Kit if:
There is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn.
There's a heated grip wire that comes out the bottom half of your rubber grip flange.
Note:
If you don't know which type of product your motorcycle is suitable for, please contact our online customer service before submitting an order.
The chrome grip flange must be removed before mounting the Throttle Lock. Top Kit can be used after chrome grip flange is removed. Bottom Kit may interfere with use of indicator button on housing.
Friction Pads are required.
The GFYSHIP Throttle Lock was designed to be used with friction pads. Friction pads can last anywhere from 3,000 miles to 40,000+ miles. The wear depends on how often you rotate the throttle while it is engaged and if your throttle housings has sharp edges that rub on the friction pad.
Which friction pad should you use?
The friction pads come in 3 different thicknesses. Your kit comes with ONE of each size but you will only need to apply one pad to your Throttle Lock. You will want to start with the thickest friction pad and see if it fits between the throttle housing and the Throttle Lock Stopper Arm. If it doesn't fit, try the next size down until you find the right size that does not make contact with the throttle housing when disengaged.
Where should I place my friction pad?
We recommend adhering the friction pad along the top edge of the Stopper Arm, but, for some motorcycles, this isn't the best solution. If your throttle housing has any bevels on it which will interfere with the friction pad during any part of the rotation, then you will want to adjust the placement of the friction pad to avoid those bevels. Sometimes this means placing the friction pad a few millimeters away from the top edge of the stopper arm, or maybe placing it to the far right or left on the stopper arm.
Fitment:
For KTM 790 Adventure ALL
For KTM 790 Duke ALL The Throttle Lock is not recommended for the 790 series when using the OEM throttle tube. Customers will need to change to an aftermarket throttle tube, such as G2 aluminum tubes. The OEM throttle tube is considered to be incompatible. Additionally, there is a lip at the seam of the throttle housing on the side facing the rider. It is recommended to loosen the mounting bolts for the throttle housing and square up the seam before mounting the Throttle Lock. G2 aluminum tubes Model: 4 stroke ALL MODELS ('17-'21).
Top Kit:
Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store
-
Fruugo ID:
411770220-871034967
-
EAN:
6442779709632
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Not suitable for children under 36 months
材料:
Others