Description: The VL53L0X is a time-of- ranging system integrated into a compact module. The sensor can report distances up to 2 m (6.6 ft) at 1 mm resolution, but its effective range and accuracy (noise) depend to a large extent on environmental and target characteristics. Measurement measurements can be made via the sensor's I2C (TWI) interface, which is also used to configure the sensor settings. The sensor provides two additional pins: the shutdown input and the interrupt output. VDD - Regulated 2.8 V output. Almost 150 mA is available to power external components. VIN - The main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I2C lines high to this level. Specification: Material: Plastic + Electronic Components Color: ,Black Size: 25x10mm/0.98x0.39inch PIN Description GND -The ground (0V) connection for your power supply. Your I2C control source must also share a common ground with this board. SDA Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store