Item Type: Heating Soldering PlateInput Interface: Type CPower Supply: PD65W 20V 3.25A (PD65W recommended)Temperature Range: 0~350 (the lowest temperature is ambient temperature, can only be increased, can not be reduced)Shell: 3D printed shell, no layeringProduct Size(LxWxH): Approx. 5.6 x 5.6 x 3.5cm / 2.2 x 2.2 x 1.4in1MINI THERMOSTAT: Smart thermostatic heating table in super mini size with 3D printed shell without layering 2FUNCTIONS AND EFFECTS: The heating soldering plate can eliminate redundant functions, retain enough effective heating area, greatly saving energy consumption and heating time 3DISPLAY AND CONTROL: Welder hot plate with Organic Light Emitting Diode screen display, support temperature control 4LOW LOSS: The application field of the soldering hot plate is wide, and the operating parts are centrally preheated to reduce the damage to nearby parts 5FAST AND EFFICIENT: Chip welding station supports USB Type C interface and PD protocol for faster heating speed1. The recommended temperature should not exceed 250.2. The power supply needs a charger that supports the PD protocol, the voltage is 20V 3.25A, and the voltage that can support the PD protocol is 20V in theory.1 x Heating Soldering Plate