3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for fast and efficient heating. Ideal for use in bathtubs, plastic barrels, buckets, fish tanks, swimming pools, and other water containers. To use, ensure the water level is at least 25 to 30 cm to allow the heater to remain fully submerged. The unit is designed to float on the water surface; adjust the power cord to position the heater correctly. The heating element must be completely submerged at all times during operation to prevent damage. For inflatable pools or bathtubs, place a non-conductive material such as ceramic under the heating tube to avoid direct contact with the container's surface. Once the container is filled with water, place the heater inside and plug it in. The indicator light will turn on, and bubbles will form around the heating element as the water begins to heat. For large volumes of water, unplug the device halfway through heating to check the temperature. When the desired temperature is reached, unplug the power cord and wait 20 seconds before removing the heater from the water. Safety instructions: - The metal heating tube must be fully submerged in water during operation. - Never touch the water while the heater is plugged in. - Always unplug the device before handling the heater or coming into contact with the water. - The stainless steel heating element must remain entirely underwater to avoid damage. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater The adapter will be delivered according to your country’s requirements.