Name: Electronic Drain Valve Indicator Lamp: LED indicating on/off Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240 V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Application: Suitable for filters, separators, dryers, gas tanks, drip legs, and other compressed air system components Installation Note: Clean the compressed air system before installation. Observe flow direction during installation — outlet must not be obstructed. Ensure supply voltage matches the valve’s rated voltage. When using DC, connect the positive pole to terminal 1. Wiring: Pre-wired at factory. Brown = L (Live), Blue = N (Neutral), Yellow-Green = GND (Ground) Safety: Tighten the terminal box screw securely to prevent moisture ingress. Warning: Before installation, ensure the compressed air system is fully depressurized and the power supply is disconnected. Color: Gold + Black Material: Metal Size: Aperture: 5 mm; Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Actual color may vary slightly due to lighting and display settings. Measurement tolerance: ±1–3 cm.