Feature: 1. With USB data transmission interface, the new firmware version automatically outputs data to the USB port by default. 2. Support direct connection to computer software to display images (computer software baud rate 115200), you can also use the corresponding serial port debugging assistant. 3. With screen color corresponding temperature adjustment function, the temperature can be set to display different colors correspondingly. 4. The infrared camera has screenshot function, you can pause the picture for analysis. 5. Can be used for heat detection of PCB components, temperature detection of auto parts, electrical switches, etc. Specification: Item Type: Infrared Imaging Camera Material: ABS Sensor Resolution: 24 x 32 dot matrix Power Supply: Mciro USB interface, the interface voltage does not exceed 5V Battery Model: Lithium battery (built-in battery) Battery Capacity: 1000 mAh Response Frequency: 8HZ Target Temperature Measurement Range: -40~+300 Use Environment: 0-50 Emissivity: 0.01-1.00 range adjustment Sensor Probe Field of View Angle: Default 35 x 55 degrees for MLX90640ESF-BAB probe Screen: 2.4in LCD 320 x 240 resolution, display the highest temperature, the lowest temperature, the temperature of the center point, and display each coordinate point. Measurement Accuracy: 2 (Test Condition: Environment 25, Measurement Target: Boiling water 100) Application: PCB component heating detection temperature, floor heating temperature detection, auto parts temperature detection, electrical switch temperature detection, conditioner, microwave oven detection Package List: 1 x Thermal Imager 1 x User Manual