Feature: 1. EV Fast Charger: With an output of 3.5kW, this 16A single phase Level2 charger can quickly charge a three phase electric vehicle. It can shorten the charging time in half. 2. Multiple Protections: EV charging station is equipped with 5m cable, built in overcurrent protection, leakage protection and other 8 kinds of safety protection to ensure your safety. 3. Smart Temperature Control Chip: If the temperature exceeds the normal value, it will reduce the output current or stop charging. After the temperature falls back to normal, charging will resume. 4. Intelligent Swing Charging: AC charging station is suitable for all electric vehicles, and are equipped with a card control switch (starting with a card), which effectively prevents people from stealing charging. A full charge (7 to 8 hours) stops automatically. 5. IP65 Waterproof and LCD Display: Works well even in the rain, safe to use both indoors and outdoors. 2.8 inch large LCD screen indicator, let you know the working status of the charging station at any time. 6. US Plug: This Level 2 electric vehicle charger has a single phase output of 240V and an input frequency of 50/60Hz. CE and TUV certifiedand compliant with SAE J1772 connector standard. Specification: Item Type: Type 1 Electric Vehicle ChargerMaterial: ABS, TPU, Copper, Silver Adjustable Current: 16A (8/10/13/16A) Voltage: 240V Power: 3.5KW Frequency: 50/60Hz Display Size: 2.8 inches Support RCD: A type RCD (delivery 3 RFID cards) User Interface: LED indicator, 2.8in LCD screen and RFID card Certificate: CE, TUV Charging Interface: Type1 and 5m/16.4ft cable Charging Head Standard: SAE J1772 Protection Class: Charging Head: IP55, Charging Station: IP65 Working Temperature: -30℃ to 55℃ Working Humidity: 5%-95% Performance: Overvoltage protection, undervoltage protection, overload protection, leakage protection, grounding protection, overtemperature protection, lightning strike protection, short circuit protection. Package List: 1 x Type1 EV Charger1 x Charging Head Wall Hook3 x Wall Hook Screw8 x Screw Cap2 x Hanging Buckle Bracket7 x Hanging Buckle Bracket Screw3 x RFID Card1 x Manual Note: 1. When installing for the first time, it is important to ensure that the power wires are routed to IN L (fire), IN N (zero), one by one, and the fire wire and zero wire cannot be reversed.2. Make sure the emergency stop button is activated after powering on.3. Before charging, make sure the tip of the EV charger is free of stains and water;4. It is forbidden to place the charging station in the car during the charging process.