WAVLINK AC600 AP 2.4G5G Dual Frequency Outdoor High Power Repeater 1. AC600 wireless repeater is mainly used to provide free Wi-Fi service in large areas such as factories, communities, streets and so on. AP Repeater can receive the existing 2.4GHz or 5GHz wireless signal, repeat and expand the range that the router or access point cannot reach. AP Repeater supports both 2.4G and 5G wireless network connections, and can support 2.4G and 5G transmission speeds up to 600Mbps. It has 2 external antennas, which can provide better wireless performance, transmission rate, stability technology, and automatically avoid channel conflicts through its channel selection function. 2. Leading 802.11ac standard 3. Comply with IEEE 802.11 ac a b g n standards 4. Dual frequency speed up to 2.4GHz 150Mbps, 5GHz 433Mbps 5. Moisture-proof RJ45 connector, integrated passive power over Ethernet (PoE) 6. Passive PoE support, flexible deployment 7. According to the different antennas, it can provide high performance on the remote link. 8. With up to 600mW power and enhanced receiver design The sturdy weatherproof housing can withstand harsh outdoor conditions. 9. Operation mode: router, AP, repeater, WISP 10. With the highest security of 802.1X, WAP and WPA2 11. Support 3 LED wireless signal strength 12. Built-in lightning arrester (15kV ESD) 13. Port: 1 x WAN LAN 14. Button: 1 x reset 8s 15. LED: 1 x power supply, 1 x WAN LAN, 1 x WiFI, 3 x signal 16. Chipset: MT7688A + 7610E 17. Flash memory: 64Mb 18. DDR2: 512M 19. Power supply: DC24V 0.5A Power over Ethernet (passive PoE) 20. Power consumption: 7W MAX 21. Rated voltagefrequency input: 100-240 Va.c. 5060 Hz 22. Dimensions: 180mm x 50mm x 50mm (L x W x H) 23. Wireless standard: IEEE 802.11bgnaac, frequency band 2.4GHz, 5GHz, maximum transmit power 27DBm 24. Sensitivity: 802.11b: -93dBm 802.11g: -73dBm 802.11n: -68dBm 25. Speed: 802.11ac: up to 433Mbps, 802.11n: up to 150Mbps; 802.11a: up to 54Mbps;