1.Integrated 10/100/1000M/2.5G transceiver2.Supports 2.5G Lite (1G data rate) mode3.Compliant with USB3.1 Specification Revision1.04.Supports USB 3.1,3.0, 2.0, and 1.15.Supports CDC-6.Supports CDC-7.Supports LPM (Link Power Management)8.Supports pair swap/polarity/skew correction9.Crossover Detection & Auto-Correction10.Supports Wake-On-LAN and "RealWoW "11.Supports power down/link down power saving12.Supports hardware (Cyclic Redundancy Check) functionIEEECompatible with IEEE 802.3, IEEE 802.3u, IEEE 802.Supports IEEE 802.1P Layer 2 Priority EncodingSupports IEEE 802.1Q VLAN taggingSupports IEEE 802.3az (Energy Efficient Ethernet)Supports IEEE 802.3bz (2.5GBASE-T)Supports Full Duplex flow control (IEEE 802.3x)Software Offload NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, , UDP) and Segmentation Task-offload ( send v1 and send v2) supportSupports jumbo to 16K bytesSupports Protocol Offload ( & NS) AOAC (Always On Always Connected)Supports 32-set 128- pattern exact matchingSupports link change wake upSupports WPD (Wake Packet Detection) CPPM (Converged Platform Power Management)Supports L1 with 3ms BESL (USB 2.0)Dynamic LTM messaging (USB 3.0)Supports U1/U2/U3 (USB 3.0)Supports suspendSystem RequirementsWindows Server ,2008, 2012, XP, Vista, 7, 8,10,11, 32 and 64 bitColour:blackMaterial:plasticPackage Contents:1x USB 3.0 Ethernet AdapterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.