2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

¥3,699
配送料無料

2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

  • ブランド: Unbranded

2.8 inch Serial 240*320 SPI Color TFT LCD Panel Serial Port Module

  • ブランド: Unbranded
希望小売価格: ¥5,590
価格: ¥3,699
得する金額: ¥1,891 (33%)
販売元:
¥3,699
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features 1、2.8 inchTFT LCD Module, 240x320 High resolution 2、2.8inch, 4-wire SPI serial bus, driver chip is ILI9341 3、This 2.8 inch TFT LCD Module can be can be easy controlled,such as AVR, STM32. 4、It can be used in any embedded systems which require display high quality colorful image 5、Perfect upgrade true color Specification Descriptions: This 2.8" TFT LCD module, 240x320 high resolution, can be can be easy controlled, such as AVR, STM32,It can be used in any embedded systems which require display high quality colorful image. Features: 2.8" TFT LCD Module, 240x320 High resolution. 2.8inch, 4-wire SPI serial bus, driver chip is ILI9341. This 2.8" TFT LCD Module can be can be easy controlled, such as AVR, STM32. It can be used in any embedded systems which require display high quality colorful image. Perfect upgrade true color. Support 3.3V input voltage Specification: Material:LCD Screen Size: 2.8 inch Control chip: ILI9341 Resolution: 240*320 Display area: 43.20(W)*57.60(H) Interface type: 4-wire SPI interface Number of pins: 18pin Display color: 262K full color Working temperature: -20~70 degrees Pixel size: 0.18*0.18 (mm) Working voltage: 3.3V Display type: TFT Weight:16g Structure: Interface: PIN No. Symbol Description 1 GND Ground 2 RESET LCM Reset pin Signal is active low. 3 SCL This pin is used serial interface clock in 4-wire 8-bit serial data interface. If not used, this pin should be connected to IOVCC or GND. 4 D/C -4-line system (D/CX): Serves as command or parameter select. Fix to IOVCC level when not in use. 5 CS Chip select pin ("Low" enable) 6 SDA Serial input signal. The data is applied on the rising edge of the SCL signal. If not used, fix this pin at IOVCC or GND 7 SDO Serial output signal. The data is outputted on the falling edge of the SCL signal. If not used, open this pin 8 CND Ground 9 VCC Power supply for LCM (2.8V-3.3V) 10 LEDA Anode of Backlight (3.0V-3.4V Typical:3.2V) 11 LEDK1 Cathode of Backlight 12 LEDK2 Cathode of Backlight 13 LEDK3 Cathode of Backlight 14 LUDK4 Cathode of Backlight 15 XL Touch panel control pin 16 YU Touch panel control pin 17 XR Touch panel control pin 18 YD Touch panel control pin Package Included: 1x TFT LCD Display (without touch panel) Note: This model without touch panel Package List
  • Fruugo ID: 271671693-602233445
  • EAN: 9367397101040

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 27 10月 2025–金 31 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る