2.8-Inch ESP32 WiFi Bluetooth-Compatible Development Board with ST7789 TFT LCD Display,Type-C + Micro USB Dual Interface

SPI Flash: Default 32Mbit Bluetooth 4.2 BR/EDR and BLE standard Wi-Fi: 802.11b/g/n/ On-chip Sensors: Hall sensor, temperature sensor, capacitive touch sensor Power Supply Range: USB power supply: 5V; Vin pin power supply: 6.0V~12V; Operating Temperature: -20°~ 80° Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard Wi-Fi: 802.11b/g/n/ Supported Interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC, DAC IO Ports: 22 Serial Port Baud Rate: Default 115200bps Frequency Range: 2412~2484MHz Antenna Type: On-board PCB antenna, 2dBi gain Transmit Power: 802.11b: 17±2dBm (@11Mbps) 802.11g: 14±2dBm (@54Mbps) 802.11n: 13±2dBm (@MCS7) Receive Sensitivity: CCK, 1Mbps: -90dBm CCK, 11Mbps: -85dBm 6Mbps (1/2BPSK): -88dBm 54Mbps (3/4 64-QAM): -70dBm MCS7 (65Mbps, 72.2Mbps): -67dBm Power Consumption: [email protected] Security: WPA/WPA2/WPA2-Enterprise/WPS PCB Board Dimensions: 85.85mm*49.40mm (Mounting hole diameter: 3.4mm) Display Type: 2.8" TFT Resolution: 240XRGBX320 Interface Type: 4SPI Driver IC: ST7789P3 Input Voltage: 3.0±0.2V Interface Connector: FPC Backlight: White LED (4-LED) Vled=3.2V; ILed = 80mA (maximum) Operating temperature: -10°C to +60°C Storage temperature: -20°C to +70°C Color: As Shown Material: Metal Package Contents: 1*Development Board 1*Data Cable 1*Stylus Pen 1*Terminal Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.