Water Level Controller Float Switch with 2 Meter Cable; Rated Current/Voltage: AC 10 (8A) 250V ~ 10 (4A) 380V; If you need to extend the wire, be very careful to seal the wire splice well if it is going to be underwater. The float switch can be used for water inlet and outlet flow from the tank to control the water level, it works in both directions. When the liquid level reaches a higher or lower switching value, the controller contact sends signals. Features: 1. It can test the liquid pressure. 2. The float switch is a switch that regulates the liquid level in the tank or well etc. 3. The float switch is water resistant 4. It is relatively suitable for use for oil, most acids and alkalis 5. This water level sensor is made of high quality material to ensure long-lasting performance, and it is a type of non-toxic material to ensure safe use 6. The float switch is not explosion-proof. 7. This liquid fluid water level sensor float switch can be widely used in water supply, drainage and automatic liquid level control with a variety of pump support. 8. This liquid water level sensor is easy to install and practical use Note: 1. Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before you bid. 2. The color may have different as the difference display, please understand. Color: Blue Quantity: 1 pc