For oil, fuel, , gas, air pressure(Cannot use measuring water pressure), Can be used in oil tank, gas tank, tank etc. It's an advance pressure transducer than traditional mechanical pressure transducer. 2% small output error, including nonlinear, hysteresis error and repeatability, full temperature range. It has complete surge voltage protection function. Light weight and small size, convenient to install and operate.<br><br>Product Name:Oil Fuel PressureTransducer Voltage:DC 5V Pressure:150psi Input:0-150 psi Output:0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V Accuracy:+/-0.5% Thread:1/8inch NPT Wiring:Red for +5V; Black for ground; Green for signal output Overload Capacity:2-4 times of rated pressure Working Temperature:-40 - +120 Compensation Temperature:0 - +80 Protection Class:IP67 Pressure Medium:Oil, gas which is compatible with 304 stainless steel Load Resistance:less than equal (supply power-6.5V/0.02A)ohm Long-term Stability:Less than 0.1%/year Temperature Effect on Zero:Typical:0.02%/; Maximum:0.05%/ Temperature Effect on Sensitivity:Typical:0.02%/; Maximum:0.05%/ Shock Resistance:1000g Anti-Shock:less than equal +/-0.01%(X,Y,Z axes, 200Hz/g) Response Time:less than equal 1ms Insulation Resistance: 100mohm 500VDC Explosion-proof Class:ExiaTTCT6 Electromagnetism Compatibility:EN50051-1 Note:Due to different production batches, there may be slight differences in products, which does not affect use. Colour:As Shown Material:Metal<br><br>Package Contents: 2 x Pressure Transducer (With Cable)<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.