Shower Screen Seal: This pack includes two 90 cm shower screen seals, designed for 4-6 mm thick glass. They provide an effective solution for keeping your bathroom floor dry. Edge Protection: The shower glass sealing strip is made of soft material, protecting the sharp edges of the shower door glass to prevent bumps and injuries. Optimal Sealing: Made of flexible PV, the sealants create an optimal seal for your shower enclosure. They are UV and mildew resistant for increased durability. Easy Installation: Trim the seal to the required length with scissors. Clean the glass door, then position the new gasket under the shower door. Push the seal from the hinge side first; it will cling to the glass. No glue or tools are needed. Versatile Application: Suitable for shower doors, sliding doors, glass doors, and door bottoms. If there is any scale or dirt on the bottom of the shower door, the sweep can be removed, cleaned, and then reinstalled. Functionality: The shower seal prevents water leakage from glass doors. It not only separates the wet and dry areas inside the shower room but also minimizes the growth of bacteria. Material: Flexible PV material Dimensions: Width: 4-6 mm, accommodates up to 20 mm gaps Length: 90 cm / 900 mm (2 pieces) Features: The shower seal is made of flexible rubber plastic, with a harder top and a softer bottom. The glass shower door seal strip can be cut to the desired length. This rubber plastic seal works well on curved shower screens; it's easier to install on curved glass doors after heating with a hairdryer or soaking in hot water. (May not fit wide-angle curved glass.)