[Product name]: rearview mirror rain eyebrow [Product packaging] plug card [Product model]: rain eyebrow [Product color]: black, transparent color [Product size]: 17*55cm [Material]: PVC [Product introduction] Rainy days, rainwater blurs the rearview mirror, making it impossible to see the road conditions behind both sides while driving, which is very dangerous. Installing a pair of eyebrows to your rearview mirror will alleviate this problem! The product is very flexible and can be bent freely to fit the style of rearview mirrors of different models. It is elegant and can be matched with any color mirrors to block the rain pipe and drive more safely. The product is made of high-quality resin material, which is not easy to deform, 3M cementation has good durability and is not afraid of rain. With rain eyebrows the rearview mirror vision can be clear on rainy days, and the dust can be reduced on the rearview mirror on sunny days. It is very practical. This product is installed on the rearview mirror outside the car, which can protect rainwater. At the same time, because this product uses a special wind guide design, when driving, the rain cover can guide the wind into the rearview mirror, so that even if there are raindrops on the mirror, it will be blown away by the wind! To ensure vision and driving safety! In addition, the material used in this product also has the characteristics of softness and strong durability. With the rain eyebrows, the rearview mirror vision can be clear on rainy days, and the dust can be reduced on the rearview mirror on sunny days, which is very practical. Reminder: the eyebrows do not completely block the rain, but only a supporting role, as if wearing a raincoat, the face will still have rain, but it can block the vast majority of raindrops, especially when driving, the raindrops will almost not hit the mirror. There is an additional guarantee for driving safety.Installation introduction:1. Before installation, please wipe the dust, grease stains and other stains on the rearview mirror with a towel and let it dry. Then try the approximate installation position on the rearview mirror with this product, and tear off the 3M glue to paste and install after confirmation. 2. After pasting, to ensure the viscosity of the 3M glue, please install it in sunny weather or at a temperature of not less than 10 degrees Celsius. 3. Do not immerse immediately after installation to avoid reducing service life.4. After installation, please try to press it by hand for a while or otherwise to ensure stickiness.5. When installing in winter, heat the 3M adhesive with a blower or hot blower to fully utilize its viscosity.