説明
2pcs 2.4 GHz Wireless USB Retro Controller compatible withSNES/SFC Game Console,compatible withWindows PC MAC Linux Genesis Raspberry Pi Retropie Grey
Feature
🎮 SNES 2.4 G wireless retro gamepad for SNES/SFC game console, with a USB receiver that is compatible with the PC platform. (Not compatible with Bluetooth devices).
🎮 Just plug in the unified receiver and it"'"s ready to use.
🎮 Third-party controller is not the original SNES/NES controller, but it excels in game emulation and so on.
🎮 Wireless reception range up to 10 meters, 1.5 meters standard USB charging line, built-in 500MAH lithium-ion battery.
🎮 Standby time: 30 days.
🎮 Working time: 48 hours.
How to Pairing?
SNES game console interface pairing:
1.Insert the receiver into the body of corresponding interface.
2.When red LED of the receiver flashes, press START of transmitter gamepad until the LED flashes to enter pairing state (the LED is always on after successful pairing).
USB interface pairing:
1.Turn on the controller by pressing the START button,the red LED will blink slowly.
2.Press the START button again,the red LED will flash rapidly indicating the controller is ready to pair.
3.Plug in the USB receiver to the PC,the red LED will stay lit to indicate the controller has been paired successfully.
LED Instructions
1. PressSTART"button, and LED flashes slowly: this handle is turned on.
2. After the handle is turned on normally, press “START” button again, and LED flashes quickly: this handle is searching for the signal from the paired device.
3. LED shines continuously: this handle has been connected and paired successfully.
4. During the charging process, LED flashes every 2 seconds: this handle is being charged, and LED turns off when the handle is fully charged.
5. LED flashes quickly intermittently: This handle is lacking power and needs to be charged.
What"'"s include
2 x 2.4 G wireless retro gamepad
2 x SNES adapters
2 x USB receivers
2 x Charging cables
1 x User Manual
-
Fruugo ID:
211019110-449772923
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
