Features: 1HIGH QUALITY MATERIAL: The connector is made of high quality PA66+ brass material waterproof silicone material design durable. 2TERMINAL: Brass contact piece good conductivity firm wire more convenient for wire management very practical. 3EXQUISITE: The T type connector has no obvious flash no burr no crack and no other appearance defects and high quality workmanship. 4EASY TO OPERATE: This 3 pin 3 way IP68 waterproof connector is easy to install and use and is used for outdoor LED power connection. 5RELIABLE: The assembly should be tight without looseness the assembly gap should be less than 0.2mm/0.01in and the breakage should be less than 0.2m/7.9in. Specification: Item Type: T Type 3 Way ConnectorModel: EW-M20T-3PMaterial: PA66 Brass SiliconeColour: BlackSize: Approx. 10 x 6.5 x 2.3cm/3.9 x 2.6 x 0.9inWiring Diameter: Approx. 9-12mm/0.4-0.5inGross Weight: Approx. 140g/4.9ozInstallation Type: AC DCWaterproof Grade: IP68Flame Retardant Grade: UL94-V2Continuity Test: 3 Core Connector and Three Heads Are Connected to Each Other RespectivelyPerformance Parameters:C. Square Number of Applicable Lines: 0.5-2.5mD. Working Temperature: -40~+105Application Scenarios: Mainly Used for Outdoor Waterproof Equipment Street Lights Buried Lights Garden Lights Outdoor Flood Lights etc.Application Field: Lighting ElectronicsApplication: Outdoor LED Power Connection Package List: 2 xConnector Note: Please allow some errors due to manual measurement.