1. ESP32-S3-Touch-LCD-7 is a microcontroller development board that supports 2.4GHz WiFi and BLE 5. It integrates large-capacity Flash and PSRAM, and has an onboard 7-inch capacitive touch screen, which can smoothly run GUI interface programs such as LVGL; combined with a variety of peripheral interfaces, it can quickly develop HMI and other applications of ESP32-S3. 2. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, clocked at up to 240MHz, supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth5 (LE), onboard antenna 3. Built-in 512KB SRAM and 384KB ROM, stacked 8MB Flash and 8MB PSRAM, onboard 7-inch capacitive touch screen, 800x480 resolution, 65K color 4. Support I2C interface to control capacitive touch, 5-point touch, support interrupt, onboard CAN, RS485, I2C interface and Micro-SD card holder, etc., integrated full-speed USB serial port 5. Support precise control such as flexible clock and independent setting of module power supply to achieve multi-scenario low power consumption mode Model: ESP32-S3 7-inch capacitive touch screen Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Colour:As Shown Material:ABS Package Contents: 2x Capacitive touch screen 4x HY2.0 2P to DuPont male cable (2P 10cm) 2x HY2.0 2P to DuPont male cable (3P 10cm) 4x HY2.0 2P to DuPont male cable (4P 10cm)