説明
Protocol:
LC USB switch default communication baud rate: 9600Bps;
LC USB Switch Communication Protocol:
Data (1)----starting identifier (default: 0xA0)
Data (2)----Switch address code (default: 0x01, identified as the first switch)
Data (3)----Operation data (0x00 is "OFF", 0x01 is "ON")
Data (4)----check code
Example:
TURN ON: A0 01 01 A2
TURN OFF: A0 01 00 A1
HOW TO USE:
1, plug the USB relay into the computer, install the CH340 to serial port chip driver;
2, open STC-ISP, SSCOM32 and other serial debugging software, select the baud rate of 9600, send "A0 01 01 A2" turn on relay in hexadecimal (hex) form; send "A0 01" in decimal (hex) 00 AZ" TURN OFF relay;
USB intelligent control switch.
Onboard high-performance -controller chip.
Board CH340 USB controller chip.
Onboard Power LED and relay status LED.
Onboard 5V, 10A / 250VAC, 10A / 30VDC relay, relay life long continuous pull 100,000 times.
Relay modules with overcurrent protection and freewheeling diode protection.
colour:blue
Material:PCB
size:49.6*16mm
Package Contents:
2 x USB relay module
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
ブランド:
Unbranded
-
カテゴリー:
KVMスイッチ
-
色:
blue
-
Fruugo ID:
271264922-601247465
-
EAN:
6444419667197
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
安全上の警告:
Not suitable for children under 24 months old, may cause choking hazard, adult supervision is required
