2x White Polypropylene (PP) M10 x 1000 mm Threaded Rods, Studding + 4 Nuts

BP1: Pack of 2 white polypropylene (PP) threaded rods. 4 nuts included. M10 x 1000 mm. Diameter: 10 mm. Pitch: 1.5 mm. SKU: 1019.. BP2: M10 gives a practical mid-size plastic thread for panel separation, stand-offs and custom spacer bars.. BP3: PP combines low weight, very low moisture absorption and resistance to many acids and alkalis when conditions are suitable.. BP4: Supplied in 1000 mm lengths for cutting down to repeated spacer sizes or longer non-metallic threaded runs.. BP5: Use where PP material properties are useful; confirm mating nut fit, thread engagement and service conditions.. || PRODUCT DESCRIPTION SUMMARY: These white polypropylene (PP) M10 x 1000 mm threaded rods are supplied as a pair of fully threaded plastic bars. M10 gives a useful mid-size plastic thread for panel separation, stand-offs, spacer bars and custom cut-to-length sections. Polypropylene is light in weight, takes up very little moisture and resists many acids and alkalis, making it useful where PP material properties are preferred over metal. It is not as stiff as nylon or steel, so use it for compatible light-duty assemblies and check thread engagement before tightening. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M10 x 1000mm. Colour_Ref: White. Material_Ref: PP / Polypropylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 1000 x 10 x 10. || Additional Specifications: Pitch_MM: 1.5. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07068-PPMaterial: PolypropyleneMaterial Reference: PPHead/Drive Type: Fully Threaded Rodsize: M10 x 1000D: 10 mmPitch: 1.5 mmL: 1000 mm