2x White PTFE M5 x 200 mm Threaded Rods - Plastic Studding + 4 Nuts

BP1: 2x fully threaded plastic rods. 4 nuts included. Material: PTFE / polytetrafluoroethylene. White. Size: M5 x 200 mm. Diameter: 5 mm. Pitch: 0.8 mm. SKU: 955.. BP2: Compact M5 format gives a manageable plastic thread for short stand-offs and small alignment points.. BP3: PTFE provides low surface friction and electrical insulation in a non-metallic threaded form.. BP4: The 200 mm length reduces waste where only a short threaded section is needed.. BP5: Use for light-duty compact spacing and custom fixing points; avoid excessive torque on the plastic thread.. || PRODUCT DESCRIPTION SUMMARY: These M5 x 200 mm white PTFE threaded rods are supplied as a pair of compact fully threaded plastic bars. The short M5 format works well where a stronger-handling small thread is useful but a long rod is not required. Use them for short stand-offs, light spacing, enclosure work, alignment points and custom non-metallic threaded sections. PTFE gives low friction, electrical insulation and broad chemical compatibility, but it is softer than metal and should not be over-tightened. Cut carefully if a shorter section is needed and confirm material suitability for the final environment. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M5 x 200mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 5 x 5. || Additional Specifications: Pitch_MM: 0.8. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07004-PTFEMaterial: PolytetrafluoroethyleneMaterial Reference: PTFEHead/Drive Type: Fully Threaded Rodsize: M5 x 200D: 5 mmPitch: 0.8 mmL: 200 mm