Features: Three series of lithium battery protection board. Automatically cancel protection after protection conditions restore. With function of overcharge protection, over discharge protection, short circuit protection, over-current protection. Suitable for lithium battery pack of 11.1V, 12V, 12.6V. Fine workmanship and durable. Quiescent current＜ 30uA, so power consumption is small. Specifications: Model: 1 :HX-3S-01, 2 :HX-3S-FL10-A Size: 1 : 50 * 16 * 1.0mm/1.97 * 0.63 * 0.04inch 2: 53 * 17 * 4.0mm/2.09 * 0.67 * 0.16inch Maximum operating current: 6-8A Maximum transient current: 1: 9-10A, 2:10-13A Quiescent current: ＜ 30uA Internal resistance: ＜ 100mΩ Working temperature: -40~+50℃ Storage condition: -40~ +80℃ Effective life: >30000h Short circuit protection: Yes, delayed self recovery The component included: 1: 1 pcs S-8254AA protection chip, 4 pcs AO4407 2: 1 pcs 2110-cb protection chip, 2 pcs AOD472 Notes: 1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C. 2.Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current. 3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6Amaximumworking current. 3.In the process of use, if the battery heat, the battery power is not applicable. This situation cannot be used for a long time.Otherwise, the battery will soon be damaged. Package Included: 1 x PCB Protection Board(have assembled)