Specifications: Electrical Rating: 6A 125VAC - 3A 250VAC Function: ON-OFF Type: Used in ceiling fan light kit and pull chain light fixture Dimensions (approximate): 0.82 x 0.82 x 0.56 inch Color: parent + black RU approved: E89885 Material: ABS Finish: Brass/Bronze/Nickel Wiring Steps For Ceiling Fans: 1. Make sure the existing light switch has 2 wires. If there are 3 wires, A 3-wire switch is required. 2. Cut the two wires from the existing light switch using wire stripper. 3. Strip black wires around 1/2 inch. 4. Connect one black wire from the light switch to one black wire from the ceiling fan. 5. Connect the other black wire from the light switch to the other black wire from the ceiling fan. 6. Secure connection between the wires using wire connectors by twisting them in a clockwise. 7. Connection of wires must be secured, otherwise, it may result in fire hazard, electrical shock or serious injury. Package Contents: 3 x Ceiling Fan Light Switch Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.