Features: 1. Ergonomic handles, comfortable to grip. 2. Suitable for the most of common application of optical network service, used for stripping 125μm 250μm optical fiber coating layer. 3. The top of the 1.98 mm hole can be used for stripping the tail fiber outer sheath. 4. The v-shaped mouth of the clamp on blade and 140 microns of open hole can be used for stripping 125μm 250μm optical fiber cladding. 5. All cut surface precision mechanical tolerance to ensure clean, smooth operation. 6. When not in use, the blade lock in the closed position. Specifications: Material: Steel Color: Yellow + Black Total Length: Approx. 16cm / 6.30inch Weight: Approx. 141g Package Included: 1 x Optical Fiber Stripping Plier Note: 1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Only optical fiber stripping plier, no other stuff included. 1、Ergonomic handles, comfortable to grip 2、Suitable for the most of common application of optical network service, used for stripping 125μm 250μm optical fiber coating layer 3、The top of the 1.98 mm hole can be used for stripping the tail fiber outer sheath 4、The v-shaped mouth of the clamp on blade and 140 microns of open hole can be used for stripping 125μm 250μm optical fiber cladding 5、All cut surface precision mechanical tolerance to ensure clean, smooth operation