Comply with IEEE 802.af Power over Ethernet (10/100/1000M Supported) Extender the range of PoE an additional 100 meters. Automatically detects and protects PoE equipment from being damaged by incorrect installation. Plug-and Play no configuration required. 5-Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable. 5-Port PoE Extender has 5 10/100/1000M Lan ports, among them, one for power input, the other four for power output. Comply with 10/100/1000 BASE-TX,IEEE 802.3 af-PoE. Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets. VLAN Mode: Out Ports 2 - 5 support VLAN isolation, lessen network traffic, and increase network security. Specification: Network standard: IEEE802.3, IEEE802.3u, IEEE802.3x PoE connection standard: IEEE 802.3af/at PoE port input power: input maximum 90W PoE port output power: 2-5 output maximum 30W,Single port maximum 24W PoE power receiving input transmission core: 1/2+, 3/6-, 4/5+, 7/8- PoE power output transmission core: 1/2+, 3/6- POE power supply transmission distance: less than equal 100 meters Power supply transmission medium: 10/100/1000BASE-TX: Category 5 and above non-screen shielded twisted pair Address Table: 2K Packet Buffer Memory: 48 Switching Capacity: 1.0Gbps Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet; Working temperature: -10c to 55c Working Humidity: 10%~90%, No Condensation; Colour:White Material:ABS The actual product may have slight color difference or difference, which not affect the use Package Contents: 3 * POE Extender Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.