This all-aluminum alloy three- gimbal is specially customized for aerial p ography drones and can carry sports cameras weighing 30-110 grams. The maximum supported camera size is 30 mm wide, 50 mm high and 70 mm long. It uses three brushless motors for high-precision and stable gimbals, allowing you to easily achieve ultra-stable aerial p ography. The gimbal circuit control system adopts an open source solution. Professionals can install the CP2102 driver, connect the USB port, and download the SimpleBGC 2 40 software package to adjust the gimbal parameters. (Non-professionals are not recommended to adjust the gimbal parameters by themselves, which may cause the gimbal to not work properly) Accuracy: 0.09 Working voltage: DC10-16V Control mode: PWW signal 53 yaw and pitch Balance stability angle: yaw angle 360/pitch angle -90 to +45 Supported camera types: sports cameras, GoPro3, GoPro4, mountain dogs, etc., weighing 30-110g Gimbal size: 80 x 80 x 80MM (L * W * H) Power connector: JST cable Color: Silver Material: Aluminum Alloy Package Contents: 1 x 3- Brushless Gimbal Camera Mount Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.