Audio Components 3 in 1 Wireless USB Bluetooth 5.0 Adapter Receiver Transmitter 3.5mm AUX Adaptador For Car TV PC Computer Home Stereo Pairing steps: This product is plug and play, no driver required.And not support Stereo under TX Mode A: Launch mode-red light 1. Plug the device into the USB port for power supply, switch to the transmit mode and the red light flashes, enter the automatic search for Bluetooth device status (such as Bluetooth adapter, Bluetooth headset, Bluetooth speaker), etc.; 2. Insert one end of the 3.5MM cable into the AUX interface of the adapter, and insert the other end into the output hole of the TV, projector, tablet, MP3, CD player, etc. or the RCA signal output hole of the TV (Output); 3. Turn on the Bluetooth device and adjust it to the pairing state, the pairing is successful, and the red light is always on. Packaging accessories: 1* 5.0 Bluetooth receiver transmitter 1* AUX cable 1* Chinese and English manual Note: The computer is plug and play, no drive, no connection (only cannot transmit data). If there is no sound, please set the sound to sound card output in the sound setting. Different Bluetooth devices (such as Bluetooth headsets) have slightly different search connection times due to differences in the schemes and protocols used, which is normal. If the pairing fails or cannot be connected for a long time, you can turn off all devices and restart them to pair again. B: Receiving mode-blue light 1. Plug the device into the USB port for power supply, switch to the receiving mode, the blue light flashes, and enter the wireless receiving state (when the computer is supplying power, first plug the cable into the product, and then plug the product into the computer); 2. Insert one end of the 3.5MM cable into the AUX interface of the adapter, and the other end into the input interface of the playback device (such as earphones, speakers, cars, etc.), or plug the 3.5 cable of other playback devices into the port of this device. 3. Turn on the Bluetooth function of the mobile phone or tablet, automatically search for Bluetooth devices, select RT-09 in the Bluetooth list and click to pair, the blue light will always be on after the pairing is successful. Note: The Bluetooth function can also be realized by plugging the device directly into the USB reading port of the player. When there is no sound when the connection is successful, please delete the successfully paired device, there may be a Bluetooth device conflict.