3 Speed Settings Ceiling Fan Remote Universal with Timer Function

Cautions:When the device cannot be remote controlled, please check whether the bar codes in the emitter and receiver are consistent, whether the indicator light on the emitter is working, whether the cable of the receiver is connected properly and whether the buzzer beeps once when power is on.When the receiver cannot be controlled by the emitter, please check whether the battery contact is normal and whether the power is sufficient. Please replace the battery in time when it runs out of power. Insensitive remote control may be caused by environmental interference and low battery.Please remove the battery when the device is not in use for a long time. Please wire properly in strict accordance with the parameters on the labels. Otherwise, it will directly shorten the service life of the device or cause immediate malfunction. The antenna must not be connected with other wires.When there is a code switch on the fan, please turn the fan to the highest gear before remote control. The receiver beeps when you click the remote control. Please make sure there is enough space in the canopy of the fan or the receiver has to be installed beside it.Operating Voltage: AC 90-220VWorking Frequency: 50-60HzRemote Control Distance: More than 20 metersSupport Encoding: 1527 learning codeOperating Mode: 1527 remote controlLoading Power:Ceiling Fan: Max. 300WIncandescent Lamp: Max. 1000WLED/Energy saving lamp: Max. 200WPlease do not overload.Remote control battery: 2 AAA batteries required (Not included)Type: 220V/110VColour: white + blackMaterial: plasticPackage Contents:1 * Controller1 * Remote control1 * Wall seat